Honda Odyssey Service Manual: Inspection

  1. Reassemble the damper mounting base, the damper mounting washer (for some models), and the self-locking nut.

  1. Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.

  2. Check for oil leaks, abnormal noises, and binding during these tests.


    Disassembly

    Reassembly

    See More:

    Honda Odyssey Service Manual > Body Exterior: Front Bulkhead Cover Replacement
    NOTE: Take care not to scratch the front bumper or the body. When prying with a flap-tip screwdriver, wrap it with protective tape to prevent damage. Remove the air intake scoop. Detach the clips, then remove the front bulkhead cover (A). NOTE: To release the clips, pry up on the center pin at the n ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.014