Honda Odyssey Service Manual: Front Stabilizer Bar Replacement

Honda Odyssey Service Manual / Chassis / Suspension / Front Stabilizer Bar Replacement

  1. Raise and support the vehicle.

  1. Remove the front wheels.

  1. Disconnect both sides of the stabilizer link from the stabilizer bar.

  1. Detach the clips (B) from mounting bracket A, then move mounting bracket A aside.

  2. AB
  1. Remove the flange bolts (A) and the bushing holders (B), then remove the bushings (C).

  2. A10 x 1.25 mm39 N·m (4.0 kgf·m, 29 lbf·ft)FRONTCB
  3. Move the stabilizer bar toward the passenger's side, and remove the stabilizer bar.


  4. Install all of the removed parts in the reverse order of removal, and note these items:

    • Note the direction of installation for the bushings.

    • Refer to stabilizer link removal/installation to connect the stabilizer bar to the links.

    • Before installing the wheel, clean the mating surfaces between the brake disc and the inside of the wheel.

    Installation

    Brake Control and Vehicle Dynamics

    See More:

    Honda Odyssey Owners Manual > When Driving: VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System
    VSA® helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It also assists in maintaining traction on slippery surfaces. It does so by regulating engine output and selectively applying the brakes. The VSA® may not function properly if tire type a ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0107