Honda Odyssey Service Manual: Removal

  1. Turn the ignition switch to LOCK (0).

  1. Remove the air cleaner.

  1. Disconnect the 10 mm brake lines (A) and the 12 mm brake lines (B) from the VSA modulator-control unit (C).

  2. CA10 x 1.0 mmB12 x 1.0 mmA10 x 1.0 mm

  1. Disconnect the VSA modulator-control unit 32P   connector (A) by pushing the lock (B) and pulling up the lever (C); the connector disconnects itself.

  2. ABC
  1. Remove the VSA modulator-control unit bracket mounting bolts (A), then remove the VSA modulator-control unit (B) with the bracket (C) from the body.

  2. CA6 x 1.0 mmA6 x 1.0 mmB

  1. Remove the VSA modulator-control unit (A) from the bracket (B).

  2. AB6 x 1.0 mm6 x 1.0 mm

    VSA Modulator-Control Unit Removal and Installation

    Installation

    See More:

    Honda Odyssey Service Manual > Blind Spot Monitor: BSI Control Unit Removal/Installation
    Remove the left rear side trim panel. Remove the BSI control unit (A). Disconnect the BSI control unit 16P connector (B) and detach the harness clip (C). Remove the bolt. BCA9.4 N·m(0.96 kgf·m,6.9 lbf·ft) Install the BSI control unit in the reverse order of removal. ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0142