Honda Odyssey Service Manual: Rotor Slip Ring Test

Honda Odyssey Service Manual / Electrical / Charging / Alternator Overhaul / Rotor Slip Ring Test

  1. Check for continuity between the slip rings (A):

    • If there is continuity, go to step 15.

    • If there is no continuity, replace the rotor assembly.

    2. ABC

  2. Check for continuity between each slip ring and the rotor (B) and the rotor shaft (C):

    • If there is no continuity, go to step 16.

    • If there is continuity, replace the rotor assembly.


    Alternator Brush Inspection

    Alternator Reassembly

    See More:

    Honda Odyssey Service Manual > Brake Control and Vehicle Dynamics: Wheel Speed Sensor Replacement
    Front Turn the ignition switch to LOCK (0). Remove the grommet (A), then disconnect the wheel speed sensor connector (B). ABCD6 x 1.0 mm9.3 N·m (0.95 kgf·m, 6.9 lbf·ft) Remove the clamp (C), the clip, and the wire guide rubber. Remove the bolt and the wheel speed sensor (D). Install the wheel spe ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0072