Honda Odyssey Service Manual: BSI Control Unit Removal/Installation

Honda Odyssey Service Manual / Electrical / Data and Communication Network / BSI Control Unit Removal/Installation

  1. Remove the left rear side trim panel.

  1. Remove the BSI control unit (A).

    1. Disconnect the BSI control unit 16P connector (B) and detach the harness clip (C).

    1. Remove the bolt.

    2. BCA9.4 N·m(0.96 kgf·m,6.9 lbf·ft)

  2. Install the BSI control unit in the reverse order of removal.

    Data and Communication Network

    Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (Canada model)

    See More:

    Honda Odyssey Service Manual > Wheels/Tires: Wheel Bolt Replacement
    Special Tools Required Ball Joint Remover, 32 mm 07MAC-SL0A102 notice Do not use a hammer or impact tools (pneumatic or electric) to remove and install the wheel bolts. Be careful not to damage the threads of the wheel bolts. Front Remove the front hub bearing unit. Separate the wheel bolt (A) from ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0063