Honda Odyssey Service Manual: Removal

  1. Do the battery terminal disconnection procedure.

  1. Remove the driver's kick panel.

  1. Loosen the bolt (A), then remove the bolt (B) from the bracket (C).

  2. ABCD
  3. Remove the bracket from the driver's under-dash fuse/relay box (D).

  1. Disconnect the connectors from the fuse side of the driver's under-dash fuse/relay box (A).

  2. ABCD
  3. Remove the screws and cover (B) from the driver's under-dash fuse/relay box.

  4. Remove the mounting bolt (C), release the tab (D), and pull the driver's under-dash fuse/relay box away from the body.

  5. Disconnect the connectors from the back side of the driver's under-dash fuse/relay box, then remove the driver's under-dash fuse/relay box.

  6. Carefully remove the relays by prying under the base of the relay.

    NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start or cause other functions to fail.


    Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (Canada model)

    Installation

    See More:

    Honda Odyssey Service Manual > Accessories: Multi-Information Switch Test/Replacement
    NOTE: SRS components are located in this area. Review the SRS component locations, and precautions and procedures   before doing repairs or servicing. Remove the driver's airbag assembly. Remove the three screws (A), then remove the steering wheel trim (B), and disconnect connectors (C) fr ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0103