Honda Odyssey Service Manual: Rear Fuse Box (Rear MICU) Removal and Installation

Honda Odyssey Service Manual / Electrical / Fuses Junctions and Relays / Rear Fuse Box (Rear MICU) Removal and Installation

NOTE: SRS components are located in this area. Review the SRS component locations, and precautions and procedures   before doing repairs or servicing.

Removal

  1. Do the battery terminal disconnection procedure.

  1. Remove the left rear side trim panel.

  1. Disconnect the connectors from the rear fuse box (A).

  2. ABB
  3. Remove the mounting bolts (B), then remove the rear fuse box.


Installation

  1. Connect the connectors to the rear fuse box, then install the rear fuse box in the reverse order of removal.

  1. Install the removed parts in the reverse order of removal.

  1. Do the battery terminal reconnection procedure.

  1. Confirm that all systems work properly.

    Fuses Junctions and Relays

    Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (Canada model)

    See More:

    Honda Odyssey Service Manual > Restraints Control: LaneWatch Camera   Inputs and Outputs
    4 5 6 1 2 3 LANEWATCH CAMERA 6P CONNECTORTerminal side of female terminals Terminal number Wire color Terminal name Description Signal 1 WHT BSM CAM SH Shield for terminals No. 2, No. 3, No. 4, No. 5, and No. 6 Less than 0.2 V at all times 2 ORN BSM COM1 Communication signal for LaneWatch camera ?? ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0103