Compressed air mixed with the R-134a forms a combustible vapor.
The vapor can burn or explode causing serious injury.
Never use compressed air to pressure test R-134a service equipment or vehicle air conditioning systems.
caution
Air conditioning refrigerant or lubricant vapor can irritate your eyes, nose, or throat.
Be careful when connecting service equipment.
Do not breathe refrigerant or vapor.
The air conditioning system uses HFC-134a (R-134a) refrigerant and polyalkyleneglycol (PAG) refrigerant oil.
Use only service equipment that is U.L.-listed and is certified to
meet the requirements of SAE J2788 to remove R-134a from the air
conditioning system.
If accidental system discharge occurs, ventilate the work area before resuming service.
R-134a service equipment or vehicle air conditioning systems should not be pressure tested or leak tested with compressed air.
Additional health and safety information may be obtained from the refrigerant and lubricant manufacturers.
Always disconnect the negative cable from the battery whenever replacing air conditioning parts.
Keep moisture and dirt out of the system. When disconnecting any
lines, plug or cap the fittings immediately; do not remove the caps or
plugs until just before you reconnect each line.
Before connecting any hose or line, apply a few drops of refrigerant oil to the O-ring.
When tightening or loosening a fitting, use a second wrench to support the matching fitting.
When discharging the system, use an R-134a refrigerant
recovery/recycling/charging station; do not release refrigerant into the
atmosphere.