Honda Odyssey Service Manual: Rear A/C Control Unit   Inputs and Outputs

Honda Odyssey Service Manual / HVAC / Cooling / Rear A/C System Description / Rear A/C Control Unit   Inputs and Outputs

5 4 3 2 1 REAR A/C CONTROL UNIT CONNECTOR B (5P)Wire side of female terminals

CONNECTOR B

Cavity

Wire color

Terminal name

Description

Signal

1

LT GRN

IG2

IG2 power supply

With ignition switch ON (II): battery voltage

2

BLU

BLW-V-Rr

Feedback signal of power rear transistor drain voltage

With ignition switch ON (II): about 0 V-battery   voltage (depending on rear blower motor speed)

3

BLK

GND

Ground for rear A/C control unit (G652)

Less than 0.2 V at all times

4

WHT

BLW-G-Rr

Outputs rear power transistor gate voltage

With ignition switch ON (II) and fan control button OFF: less than 0.2 V
   With ignition switch ON (II) and fan control button ON: about 4.0 V-battery   voltage (depending on rear blower motor control)

5

ORN

BUS-DATA

Front-Rear communication

???


    Rear A/C Control Unit   Inputs and Outputs

    Rear A/C Control Panel   Inputs and Outputs (With Climate Control)

    See More:

    Honda Odyssey Service Manual > Steering: Hydraulic Power Steering Hose, Line, and Pressure Switch Replacement
    Note these items during installation: Connect each hose to the corresponding line securely until it contacts the stop on the line. Install the clamp or adjustable clamp at the specified distance from the hose end as shown. Check all clamps for deterioration or deformation; replace the clamps with ne ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.006