Honda Odyssey Service Manual: Receiver/Dryer Desiccant Replacement

Honda Odyssey Service Manual / HVAC / Cooling / Receiver/Dryer Desiccant Replacement

NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.

  1. Remove the A/C   condenser.

  1. Remove the cap (A) from the bottom of the A/C   condenser. Remove the O-ring (B) and the desiccant (C).

  2. A2.9 N?m (0.30 kgf?m, 2.1 lbf?ft)CBReplace.
  3. Install the receiver/dryer in the reverse order of removal, and note these items:

    • If you are installing a new desiccant, add refrigerant oil (DENSO ND-OIL 8)

    • Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them. Be sure to use the correct O-rings   for HFC-134a (R-134a) to avoid leakage.

    • Install the cap to the specified torque. It is made of plastic and can be easily stripped.

    A/C Compressor Relief Valve Replacement

    Blower Motor

    See More:

    Honda Odyssey Owners Manual > When Driving: VSA® (Vehicle Stability Assist), aka ESC (Electronic Stability Control), System
    VSA® helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It also assists in maintaining traction on slippery surfaces. It does so by regulating engine output and selectively applying the brakes. The VSA® may not function properly if tire type a ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0057