Honda Odyssey Service Manual: HVAC Controls

Honda Odyssey Service Manual / HVAC / HVAC Controls

HVAC Control Unit Removal/Installation (Without Climate Control)

  1. Remove the center panel.

  1. Remove the self-tapping screws and the HVAC control unit (A).

    2. A

  2. Install the control unit in the reverse order of removal. After installation, operate the various functions to see whether it works properly.

  3. Run the self-diagnostic function to confirm that there are no problems in the system.

    Cabin Filter

    HVAC Sensors

    See More:

    Honda Odyssey Service Manual > Wheels/Tires: Wheel Runout Inspection
    Raise and support the vehicle. Check for bent or deformed wheels. Set up the dial gauge as shown, and measure the axial runout by turning the wheel. Front and rear wheel axial runout: Standard: Steel wheel: 0-0.7 mm (0.0-0.028 in) Aluminum wheel: 0-0.3 mm (0-0.012 in) Service limit: 2.0 mm (0.079 in ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0091