Honda Odyssey Service Manual: Without Navigation

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to scratch the tailgate and related parts.

  1. Remove the tailgate lower trim panel   and the rear license trim.

  1. Disconnect the connectors (A), and detach the harness clips.

  2. BAA
  3. Remove the nuts, and the rearview camera assembly (B).

  1. Remove the screws and the rearview camera (A).

  2. A
  3. Install the rearview camera in the reverse order of removal.

    Rearview Camera Removal/Installation (Without Navigation)

    Blind Spot Monitor

    See More:

    Honda Odyssey Service Manual > Alternator Overhaul: Alternator Brush Inspection
    Measure the length of both brushes (A) with a vernier caliper (B): If either brush is shorter than the service limit, replace the brush holder assembly. If the brush length is OK, go to step 14. Alternator Brush Length Standard (New): 10.5 mm (0.413 in) Service Limit: 1.5 mm (0.059 in) BA ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0352