Honda Odyssey Service Manual: Fuel Pump/Fuel Gauge Sending Unit Replacement

Honda Odyssey Service Manual / Body / Driver Info & Control / Gauges / Fuel Pump/Fuel Gauge Sending Unit Replacement

  1. Remove the fuel tank unit.

  1. Remove the fuel level sensor (fuel gauge sending unit) (A) from the fuel tank unit (B).

  2. ABC
  3. Check these items before installing the fuel tank unit:

    • When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place.

    • When installing the fuel gauge sending unit, make sure the connection is secure. Be careful not to bend or twist it excessively.

  4. Install the parts in the reverse order of removal. When installing the fuel tank unit, align the marks on the unit and the fuel tank.

    How to Release Locked Odometer Mileage to the Original Gauge Control module

    Body Interior

    See More:

    Honda Odyssey Service Manual > Blind Spot Monitor: BSI Radar Unit Removal/Installation
    Remove the rear bumper. Remove rear bumper side spacer B. BNOTE: This illustration shows left of the vehicle, right is similar. Remove the BSI radar unit (A). Disconnect the 6P connector (B). Remove the bolts. BA6 x 1.0 mm 9.4 N·m (0.96 kgf·m, 6.9 lbf·ft)NOTE: This illustration shows left of the ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0073