Honda Odyssey Service Manual: Exploded View

FLARE NUTS15 N·m (1.5 kgf·m, 11 lbf·ft)CYLINDER LINESGEARBOX HOUSINGCIRCLIPReplace.GASKETReplace.RACK STOPRACK BUSHINGPISTON SEAL RINGReplace.BOOTInspect for damage and deterioration.STEERING RACKCYLINDER END SEALReplace.END PLUG59 N·m (6.0 kgf·m, 44 lbf·ft)NUT25 N·m (2.5 kgf·m, 18 lbf·ft)RACK GUIDESPRINGRACK GUIDE SCREWLOCKNUTVALVE BODY UNITCYLINDER END SEALReplace.O-RINGSReplace.CONNECTOR B25 N·m (2.5 kgf·m, 18 lbf·ft)O-RINGReplace.VALVE OIL SEALReplace.O-RINGReplace.O-RINGReplace.TIE-ROD CLIPBOOT BANDReplace.LOCK NUT14 x 1.5 mm44 N·m (4.5 kgf·m, 32 lbf·ft)LOCK WASHERReplace.RACK END 88 N·m (9.0 kgf·m, 65 lbf·ft)Inspect for faulty movement anddamage.TIE-ROD END BALL JOINT BOOTInspect for and deterioration.FLANGE BOLT18 N·m (1.8 kgf·m, 13 lbf·ft)CONNECTOR A25 N·m (2.5 kgf·m, 18 lbf·ft)TIE-ROD ENDFLARE NUTS15 N·m (1.5 kgf·m, 11 lbf·ft)STEERING GEARBOXMOUNT CUSHION

Special Tools Required

  • Driver Handle, 480 mm 070GD-0010100
  • Driver Head 07946-MJ00201
  • Piston Seal Ring Guide 07LAG-SM40100
  • Piston Seal Ring Sizing Tool 07LAG-SM4020A
  • Driver Handle, 15 x 135L 07749-0010000
  • Bearing Driver Attachment, 42 x 47 mm 07746-0010300
  • Bearing Driver Attachment, 30 mm I.D. 07746-0030300
  • Oil Seal Driver, 65 mm 07JAD-PL9A100
  • Pincers Oetiker 1098, commercially available

NOTE: Refer to the Exploded View as needed during the following procedure.

    Steering Gearbox Overhaul

    Steering Gearbox Removal and Installation

    See More:

    Honda Odyssey Service Manual > Compass: Electrical Compass Unit Removal/Installation
    Remove the headliner. Remove the screw, then pull out the electrical compass unit (A). BA Disconnect the connector (B), and remove the electrical compass unit. Install the electrical compass unit in the reverse order of removal. NOTE: If you replaced the electrical compass unit, set the compass zone ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2021 Copyright www.hodyssey.net
    0.0196