Honda Odyssey Service Manual: Power Seat Adjustment Switch Test/Replacement

Honda Odyssey Service Manual / Body / Seating / Seats / Power Seat Adjustment Switch Test/Replacement

NOTE: SRS components are located in this area. Review the SRS component locations, and precautions and procedures   before doing repairs or servicing.

  1. Remove the driver's seat.

  1. Remove the power seat adjustment switch knobs (A) from the power seat adjustment switch (B).

  2. 1 2 3 4 5 6 7 8 9 10 1 1 1 2 AB
  3. Remove the driver's seat front cover   and recline cover.

  4. Disconnect the 12P connector from the switch, then remove the two screws.

  5. Reinstall the adjustment switch knobs to the switch.

  1. Check for continuity between the terminals in each position according to the table.

  2. TerminalPositionSLIDESWITCHForwardBackward1RECLINESWITCHForwardBackwardFRONTUP-DOWNSWITCHUPDOWNREARUP-DOWNSWITCHUPDOWN345679101112????????????????
  3. If the continuity is not as specified, replace the switch.

  4. Install the part in the reverse order of removal.

    Front Passenger's Power Seat Adjustment Switch Test/Replacement

    Front

    See More:

    Honda Odyssey Service Manual > Rear A/C System Description: Rear A/C Control Unit   Inputs and Outputs
    1 7 2 8 3 9 4 1 0 5 1 1 6 1 2 REAR A/C CONTROL UNIT CONNECTOR A (12P)Wire side of female terminals CONNECTOR A Cavity Wire color Terminal name Description Signal 1 PNK M-HOT-Rr Output to drive rear air mix control motor to HOT side With ignition switch ON (II) and rear air mix control motor moving ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2020 Copyright www.hodyssey.net
    0.015