Specified fluid: Honda Heavy Duty Brake Fluid DOT 3 Use the same fluid for the brakes. NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage. If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement. Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible. If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible. ■Checking the Brake Fluid
The fluid level should be between the MIN and MAX marks on the side of the reservoir. |
Honda Odyssey Service Manual > Headlight Leveling Motors: Combination Light Switch Test/Replacement
Remove the steering column covers. Disconnect the 12P connector (A) from the combination light switch (B). 1 2 3 4 5 6 7 8 9 10 1 1 1 2 AB Remove the two screws, then slide out the combination light switch. Inspect the connector terminals to be sure they are all making good contact. If the terminals ...