Honda Odyssey Owners Manual: Fog Light Bulbs

When replacing, use the following bulbs.

Fog Light: 55 W (H11)

1. Turn the steering wheel all the way to the opposite side from the fog light being replaced.
Passenger side: Turn the steering wheel to the left.
Driver side: Turn the steering wheel to the right.
2. Remove the mounting bolt and screws, and pull the inner fender back.

3. Remove the coupler.
►  It can be removed by pushing the tab.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the fog light assembly and turn it to the right.
6. Insert the coupler into the connector of the bulb.

NOTICE

Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The fog lights are halogen bulbs.

When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

    Low Beam Headlights

    Front Turn Signal/Parking/Side Marker Light Bulbs

    See More:

    Honda Odyssey Service Manual > Frame and Structure: Subframe Replacement
    Special Tools Required Subframe Alignment Pin 070AG-SJAA10S Front Subframe Torque After removing the subframe mounting bolts, the front subframe rear stiffener mounting bolts, the rear engine mounting base bracket bolts, and the steering gearbox stiffener mounting bolts, be sure to replace them with ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0061