Checking the Engine If the engine does not start, turn the ignition switch to START
If you must start the vehicle immediately, use an assisting vehicle to jump start it.
|
Honda Odyssey Service Manual > Wheels/Tires: Wheel Runout Inspection
Raise and support the vehicle. Check for bent or deformed wheels. Set up the dial gauge as shown, and measure the axial runout by turning the wheel. Front and rear wheel axial runout: Standard: Steel wheel: 0-0.7 mm (0.0-0.028 in) Aluminum wheel: 0-0.3 mm (0-0.012 in) Service limit: 2.0 mm (0.079 in ...