Honda Odyssey Service Manual: Rear Controller and Screen Connector for Inputs and Outputs (RES type)

REAR CONTROLLER and SCREEN CONNECTOR A (24P)

Cavity	Wire Color	Terminal Name	Description
A1	PNK	SCTY3	Security signal to DVD player unit
A2	RED	HP L	Inputs sound signal from audio-navigation unit or audio unit
A3	WHT	HP R/L GND	Ground for sound signal
A4	RED	RR AUX AUDIO L	Outputs AUX sound signal to audio-navigation unit or audio unit
A5	BLK	RR AUX AUDIO GND	Ground for AUX sound signal
A6	RED	HP L OUT	Outputs sound signal to RES auxiliary jack assembly
A7	WHT	HP R OUT	Outputs sound signal to RES auxiliary jack assembly
A8	YEL	GA BUS-	GA-Net bus communication signal
A9	BRN	GA BUS+	GA-Net bus communication signal
A10	LT BLU	GA SYS ON	Detects rear controller and screen switching ON/OFF
A11	BLK	GND	Ground for rear controller and screen (G701)
A12	GRN	+B BACK UP	Continuous power source
A13	GRY	SCTY4	Security signal from center display unit
A14	BLK	HP R	Inputs sound signal from audio-navigation unit or audio unit
A15	Not used	Not used	???
A16	WHT	RR AUX AUDIO R	Outputs AUX sound signal to audio-navigation unit or audio unit
A17	Not used	Not used	???
A18	BLK	HP R/L OUT GND	Ground for sound signal
A19	GRY*	HP R/L OUT SH	Shield for terminals No. 6, No. 7, and No. 18
A20	GRY*	GA BUS SH	Shield for terminals No. 8 and No. 9
A21	GRY	ILLUMI+	Detects parking light on signal
A22	RED	ILLUMI- (LED)	Detects illumination control signal
A23	BLK	GND	Ground for rear controller and screen (G701)
A24	Not used	Not used	???

*:	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the circuit diagram.

REAR CONTROLLER and SCREEN CONNECTOR B (12P)

Cavity	Wire Color	Terminal Name	Description
B1	BRN	RR NTSC	Inputs video signal from audio-navigation unit or audio unit
B2	YEL	RR NTSC GND	Ground for video signal
B3	YEL	VIDEO	Inputs video signal from RES auxiliary jack assembly
B4	Not used	Not used	???
B5	BLK	AUDIO IN L	Inputs sound signal from RES auxiliary jack assembly
B6	RED	AUDIO IN GND	Ground for audio signal
B7	Not used	Not used	???
B8	BRN	VIDEO GND	Ground for video signal
B9	GRY*	VIDEO SH	Shield for terminals No. 3 and No. 8
B10	Not used	Not used	???
B11	WHT	AUDIO IN R	Inputs sound signal from RES auxiliary jack assembly
B12	GRY*	AUDIO IN SH	Shield for terminals No. 5, No. 6, and No. 11

*:	The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the circuit diagram.

Honda Odyssey Service Manual > Occupant Classification System: Front Passenger's Weight Sensor Unit Replacement
Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the front cover. From under the front passenger's seat, disconnect the front passenger's weight sensor unit connectors A, B, and C. ADEFBC Remove the front passenger's weight sensor uni ...

Honda Odyssey Owners Manual

0.0075