Honda Odyssey Service Manual: Coin Pocket Removal/Installation

Honda Odyssey Service Manual / Body / Body Interior / Dashboard Assembly / Coin Pocket Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.

  1. From under the dash, remove the screws, then remove the coin pocket (A).

    2. Fastener Locations? : Screw, 4A

  1. If necessary, release the pocket spring (A) from the pocket panel (B) and the pocket (C). Release the projections (D), then remove the pocket from the pocket panel.

    2. ABCD

  1. Install the pocket in the reverse order of removal.

    Center Switch Panel Removal/Installation

    Dashboard Center Middle Panel Removal/Installation

    See More:

    Honda Odyssey Service Manual > Rear Knuckle/Hub Bearing Unit Replacement: Hub Bearing Unit Replacement
    Raise and support the vehicle. Remove the wheel nuts (A) and the wheel. A14 x 1.5 mm127 N·m(13.0 kgf·m, 94 lbf·ft) Remove the brake hose mounting bolt (A). CB12 x 1.25 mm88 N·m (9.0 kgf·m, 65 lbf·ft)A8 x 1.25 mm 21 N·m (2.1 kgf·m, 15 lbf·ft) Remove the brake caliper bracket mounting bolts ( ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0067