Honda Odyssey Service Manual: LaneWatch Camera   Inputs and Outputs

Honda Odyssey Service Manual / Body / Restraints / Restraints Control / LaneWatch Camera   Inputs and Outputs

4 5 6 1 2 3 LANEWATCH CAMERA 6P CONNECTORTerminal side of female terminals

Terminal number

Wire color

Terminal name

Description

Signal

1

WHT

BSM CAM SH

Shield for terminals No. 2, No. 3, No. 4, No. 5, and No. 6

Less than 0.2 V at all times

2

ORN

BSM COM1

Communication signal for LaneWatch camera

???

3

YEL

BSM CAM VID

Video signal for LaneWatch camera

???

4

BLK

BSM CAM VID GND

Ground for LaneWatch camera

Less than 0.2 V at all times

5

BRN

BSM COM2

Communication signal for LaneWatch camera

???

6

RED

BSM CAM +B

Power supply for the LaneWatch camera

Vehicle in ON mode: About 8 V

Vehicle in OFF mode: About 0 V

    LaneWatch Camera

    Crash Sensors

    See More:

    Honda Odyssey Service Manual > Brake Control and Vehicle Dynamics: Suspension Stroke Sensor Replacement
    Raise the vehicle, make sure it is securely supported. Disconnect the 3P connector (A) from the suspension stroke sensor (B). Front ABDo not disassemble.D9.4 N?m (0.96 kgf?m, 6.9 lbf?ft)Replace.C Rear A9.4 N?m (0.96 kgf?m, 6.9 lbf?ft)Do not disassemble.BCD Remove the bolt(s) (C) and the nut (D), the ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0057