Honda Odyssey Service Manual: Front Parking Brake Cable Replacement

Honda Odyssey Service Manual / Chassis / Brakes / Parking Brake / Front Parking Brake Cable Replacement

  1. Release the parking brake pedal.

  1. Remove the driver's side front door sill trim and the kick panel.

  1. Remove the footrest.

  1. Pull back the carpet (A), then remove the equalizer cover (B).

    2. AB6 x 1.0 mm9.3 N·m (0.95 kgf·m, 6.9 lbf·ft)

  1. Disconnect and remove the return spring (A), then remove the wire guide base (B).

    2. AB8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)8 x 1.25 mm22 N·m (2.2 kgf·m, 16 lbf·ft)CD

  2. Disconnect the rear parking brake cables (C) from the equalizer (D).

  1. Remove the parking brake cable from the parking brake pedal assembly.

  1. Remove the parking brake cable mounting hardware, then remove the cable.

  1. Install the parking brake cable in the reverse order of removal.

  1. Adjust the parking brake.

    NOTE: Do the Major Adjustment first, then do the Minor Adjustment. Apply the parking brake firmly 10 times   then adjust it again.


    Parking Brake Cable Replacement

    Rear Parking Brake Cables Replacement

    See More:

    Honda Odyssey Service Manual > Alternator Overhaul: Alternator Reassembly
    If you removed the OAD pulley, install it. Remove any grease or any oil from the slip rings. Put the rear housing assembly and the drive-end housing/rotor assembly together, tighten the four through bolts. Push the brushes (A) in, then insert a pin or drill bit (B) (about 1.6 mm (1/16 in) diameter) ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0097