Honda Odyssey Service Manual: Removal

  1. Do the battery terminal disconnection procedure.

  1. Remove the driver's kick panel.

  1. Disconnect the connectors from the fuse side of the driver's under-dash fuse/relay box (A).

  2. ABC
  3. Remove the mounting bolt (B), release the tab (C), and pull the driver's under-dash fuse/relay box away from the body.

  4. Disconnect the connectors from the back side of the driver's under-dash fuse/relay box, then remove the driver's under-dash fuse/relay box.

  5. Carefully remove the relays by prying under the base of the relay.

    NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start or cause other functions to fail.


    Driver's Under-Dash Fuse/Relay Box (Driver's MICU) Removal and Installation (USA model)

    Installation

    See More:

    Honda Odyssey Service Manual > Body Exterior: Rear Inner Fender Replacement
    NOTE: Put on gloves to protect your hands. Take care not to scratch the body or the rear bumper. When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage. Remove the rear wheel. Remove the rear inner fender (A). Remove the screws (B) and the bolts (C). Detach the clips ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.008