Honda Odyssey Service Manual: HVAC Sensors

Rear Evaporator Temperature Sensor Replacement (With Climate Control)

SRS components are located in this area. Review the SRS component locations   and the precautions and procedures   before doing repairs or service.

  1. Remove the rear HVAC unit.

  1. Disconnect the 2P connector (A) from the rear evaporator temperature sensor (B), then detach the connector clip (C). Remove the self-tapping screw and the rear evaporator temperature sensor from the rear HVAC unit.

  2. ABC
  3. Install the sensor in the reverse order of removal.

Humidity/In-Car Temperature Sensor Replacement (With Climate Control)

  1. Remove the center lower console.

  1. Remove the humidity/in-car temperature sensor (A) from the center lower console.

  2. A
  3. Install the sensor in the reverse order of removal. Be sure to connect the air hose securely.

    HVAC Controls

    Ventilation Doors

    See More:

    Honda Odyssey Service Manual > Suspension: Ball Joint Boot Inspection/Replacement
    Special Tools Required Clip Guide, 44 mm 07GAG-SD40700 Clip Guide, 41 mm 07974-SA50700 Front lower arm/Rear upper arm Check the ball joint boot for weakness, damage, cracks, and grease leaks. NOTE: If the ball joint boot is damaged and leaks grease, replace the appropriate part as an assembly. If th ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.007