Honda Odyssey Owners Manual: High-Mount Brake Light Bulb

When replacing, use the following bulb.

High-Mount Brake Light: 16 W

1. Remove the lens segment by prying on the edge using a flat-tip screwdriver.
► Wrap the flat-tip screwdriver with a cloth to prevent scratches.

2. Turn the socket to the left and remove it.
3. Remove the old bulb and insert a new bulb.

    Rear License Plate Light Bulbs

    Checking and Maintaining Wiper Blades

    See More:

    Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Third) Replacement
    Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the rear side trim panel. Disconnect the side impact sensor (third) 4P connector (A) on the left or right side wire harness. Left side ABC Right side ABDC Remove the TORX bolt (B) using ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.1128