When replacing, use the following bulbs. Rear License Plate Light: 5 W
1. Remove the cover by prying on the edge of
the cover using a flat-tip screwdriver.
2. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket. |
Honda Odyssey Service Manual > Ergonomic Settings: Driving Position Memory Switch Test/Replacement
Remove the driver's door panel. Disconnect the 10P connector (A) from the driver's position memory switch (B). 6 5 4 3 2 1 10 9 8 7 AB Remove the two screws, then remove the switch from the door panel. Check for continuity between the terminals in each switch position according to the table. NOTE: M ...