Honda Odyssey Service Manual: RDS-TMC Antenna Amplifier Replacement

Honda Odyssey Service Manual / Accessories / Antenna / RDS-TMC Antenna Amplifier Replacement

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures   before doing repairs or service.

  1. Remove the left C-pillar trim.

  1. Disconnect the connector (A) from the RDS-TMC antenna and the connector (B) from the RDS-TMC antenna amplifier (C).

  2. ACD 6 x 1.0 mm 9.4 N·m (0.96 kgf·m, 6.9 lbf·ft)B
  3. Remove the bolt (D) and the RDS-TMC antenna amplifier.

  4. Install the RDS-TMC antenna amplifier in the reverse order of removal.

    Keyless Access LF Antenna (Rear Interior) Replacement

    XM Antenna Replacement

    See More:

    Honda Odyssey Service Manual > Brake Control and Vehicle Dynamics: Suspension Stroke Sensor Replacement
    Raise the vehicle, make sure it is securely supported. Disconnect the 3P connector (A) from the suspension stroke sensor (B). Front ABDo not disassemble.D9.4 N?m (0.96 kgf?m, 6.9 lbf?ft)Replace.C Rear A9.4 N?m (0.96 kgf?m, 6.9 lbf?ft)Do not disassemble.BCD Remove the bolt(s) (C) and the nut (D), the ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0072