Honda Odyssey Service Manual: Blind Spot Information System (BSI) Radar Unit Inputs and Outputs

Honda Odyssey Service Manual / Accessories / Driver Assist / Blind Spot Monitor / Blind Spot Information System (BSI) Radar Unit Inputs and Outputs

Terminal number	Wire color	Terminal name	Description	Signal
1	LT GRN	IG1 ECU RR(7.5A)	Power supply for the BSI radar unit	Vehicle in ON mode: Battery voltage Vehicle in OFF mode: About 0 V
2	RED	DR BSI IND+	Drives the BSI alert indicator	???
3	PNK	B-CAN H	B-CAN communication (high) circuit	???
5	BLU	B-CAN L	B-CAN communication (low) circuit	???
6	BLK	GND	Ground circuit for the BSI radar unit	Less than 0.2 V at all times

Blind Spot Information System (BSI) Radar Unit Inputs and Outputs

Terminal number	Wire color	Terminal name	Description	Signal
1	LT GRN	IG1 ECU RR(7.5A)	Power supply for the BSI radar unit	Vehicle in ON mode: Battery voltage Vehicle in OFF mode: About 0 V
2	LT BLU	AS BSI IND+	Drives the BSI alert indicator	???
3	PNK	B-CAN H	B-CAN communication (high) circuit	???
5	BLU	B-CAN L	B-CAN communication (low) circuit	???
6	BLK	GND	Ground circuit for the BSI radar unit	Less than 0.2 V at all times

Honda Odyssey Service Manual > Over-Run Alternator Decoupler (OAD) Pulley Removal and Installation: Installation
Loosely tighten the OAD pulley (A), then insert the alternator OAD pulley holder (B) into the OAD pulley. B07AAB-TK8A100A Place a 10 mm deep socket wrench (A) through center of the alternator OAD pulley holder (B), onto the hex on the end of the alternator shaft. ABC Hold the alternator OAD pulley ...

Honda Odyssey Owners Manual

0.0054