Honda Odyssey Service Manual: Locks

Glove Box Lock Cylinder Replacement

NOTE: Take care not to scratch the glove box.

  1. Remove the glove box.

  1. While lifting the glove box handle (A), pull one end of the retainer (B) out of its slot with a hook-shaped tool.

    NOTE: Do not remove the retainer entirely. Leave one end of the retainer in its original position when removing the lock cylinder.

  2. ABBB
  1. Remove the glove box lock cylinder (A).

  2. A
  1. Reinstall the end of the retainer (A) in its slot, then reinstall the lock cylinder (B).

    NOTE: Push the cylinder into place securely until the retainer snaps into place.

  2. AAAB
    Under-Dash Subrelay Box Test/Replacement (With Keyless Access)

    Storage

    See More:

    Honda Odyssey Service Manual > Ignition/Push Start and Steering Lock: Steering Lock Replacement (With Keyless Access)
    Remove the steering column. Center-punch both of the shear bolts (A), and drill their heads off with a 5.0 mm (0.197 in) drill bit. Be careful not to damage the steering lock (B) when removing the shear bolts. AB Remove the shear bolts from the steering lock, then remove the steering lock. Install t ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0081