Honda Odyssey Service Manual: Ambient Light Test/Replacement

Honda Odyssey Service Manual / Body / Body Electrical / Lighting / Interior Lighting / Ambient Light Test/Replacement

NOTE: The ambient light is built into the interior light switch.

  1. Remove the front individual map lights.

  1. Disconnect the interior light switch 12P connector (A) and the front individual map light 3P connector (B).

    Ambient Light: LED
    2. 1 2 3 4 5 6 7 8 9 10 1 1 1 2 ABC

  2. Remove the interior light switch (C) from the front individual map light housing.

  3. At the interior light switch 12P connector, check the light by connecting battery power to terminal No. 11 and ground to terminal No. 9. The ambient light should come on.

  4. If the LED does not come on, the ambient light is faulty; replace the interior light switch assembly.

  1. Install the parts in the reverse order of removal.

    Interior Lighting

    Interior Light Switch Test/Replacement

    See More:

    Honda Odyssey Service Manual > Trunklid/Tailgate/Cargo Doors: Power Tailgate Drive Unit Replacement
    Remove the C-pillar trim. Remove the upper trim and the left tailgate side trim. Note the alignment marks on the drive unit and the arm unit, then carefully remove the two bolts (A), nut (B), and the arm unit (C). CB12 x 1.25 mm109.0 N·m (11.11 kgf·m, 80.41 lbf·ft)A2.2 N·m (2.2 kgf·m, 16.0 lbf ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.011