Honda Odyssey Service Manual: Interior Light Switch Test/Replacement

Honda Odyssey Service Manual / Body / Body Electrical / Lighting / Interior Lighting / Interior Light Switch Test/Replacement

NOTE: The interior light switch allows you to select when the front individual map lights come on.
You can select the ON, OFF, or DOOR position.

  1. Remove the front individual map lights.

  1. Disconnect the interior light switch 12P connector (A) and the front individual map light 3P connector (B).

    2. 1 2 3 4 5 6 7 8 9 10 1 1 1 2 ABC

  2. Remove the interior light switch (C) from the map light housing.

  1. Check for continuity between the terminals in each switch position according to the table.

    2. TerminalPositionDOORONOFF710812???????

  1. If the continuity is not as specified, replace the interior light switch assembly.

  1. Install the parts in the reverse order of removal.

    Ambient Light Test/Replacement

    Door Courtesy Light Replacement

    See More:

    Honda Odyssey Service Manual > Rear Knuckle/Hub Bearing Unit Replacement: Knuckle Replacement
    Remove the hub bearing unit. Remove the flange nuts (A), then remove the backing plate (B) with the parking brake shoe assembly. To prevent damage to the backing plate with the parking brake shoes assembly and parking brake cable, use a short piece of wire to hang the backing plate from the undercar ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0282