Clock You can adjust the time in the clock display, using the CLOCK button with the
ignition switch in ON
1. Press the CLOCK button to access the clock
adjustment mode screen. These indications are used to show how to operate the selector knob.
Rotate
Press You can also press the SETUP button to access the clock adjustment mode screen.
1. Press the SETUP button. Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted. |
Honda Odyssey Service Manual > Front Knuckle/Hub Bearing Unit Replacement: Knuckle Replacement
Remove the hub bearing unit. Remove the wheel speed sensor (A) from the knuckle (B). Do not disconnect the wheel speed sensor connector. AB6 x 1.0 mm9.3 N·m (0.95 kgf·m, 6.9 lbf·ft) Remove the cotter pin (A) from the tie-rod end ball joint, then remove the nut (B). NOTE: During installation, inst ...