Honda Odyssey Service Manual: Detachable Console Disassembly/Reassembly

Special Tools Required

• KTC Trim Tool Set SOJATP2014

*Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

• Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

• Take care not to scratch the console or the related parts.

1. Remove the detachable console.

2. Pull out the front beverage holder (A) to detach the clips (B, C), then remove it.

3. Remove the front panel (A).

   1. Remove the screws.

   1. Release the hook (B), and pull out the panel to detach the clips.

4. Remove the screws, then remove the lock (A).

5. Pull out the rear beverage holder (A) to detach the clips (B, C), then remove it.

6. Remove the rear trim (A).

   1. Remove the screws.

   1. Pull out the trim to detach the clips.

7. Remove the screws, and release the projection (A), then remove the lid (B).

8. Remove the torque hinge (A) from the lid (B).

   1. Remove the screw.

   1. Remove the E-clip (C).

   1. Pull out the torque hinge.

9. Remove the screws, then remove the detachable console dampers (A).

1. Reassemble the detachable console in the reverse order of disassembly, and note these items:

   • If the clips are damaged or stress-whitened, replace them with new ones.

   • Push the clips, the hooks, and the projection into place securely.