Honda Odyssey Service Manual: Glove Box Lock Cylinder Replacement

Honda Odyssey Service Manual / Body / Body Interior / Dashboard Assembly / Glove Box Lock Cylinder Replacement

NOTE: Take care not to scratch the glove box.

  1. Remove the glove box.

  1. While lifting the glove box handle (A), pull one end of the retainer (B) out of its slot with a hook-shaped tool.

    NOTE: Do not remove the retainer entirely. Leave one end of the retainer in its original position when removing the lock cylinder.

  2. ABBB
  1. Remove the glove box lock cylinder (A).

  2. A
  1. Reinstall the end of the retainer (A) in its slot, then reinstall the lock cylinder (B).

    NOTE: Push the cylinder into place securely until the retainer snaps into place.

  2. AAAB
    Instrument Visor Removal/Installation

    Mirrors

    See More:

    Honda Odyssey Service Manual > Wheels/Tires: Wheel Runout Inspection
    Raise and support the vehicle. Check for bent or deformed wheels. Set up the dial gauge as shown, and measure the axial runout by turning the wheel. Front and rear wheel axial runout: Standard: Steel wheel: 0-0.7 mm (0.0-0.028 in) Aluminum wheel: 0-0.3 mm (0-0.012 in) Service limit: 2.0 mm (0.079 in ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0069