Honda Odyssey Service Manual: Third Row Seat Latch Replacement

Honda Odyssey Service Manual / Body / Seating / Seats / Third Row / Third Row Seat Latch Replacement

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

  • Put on gloves to protect your hands.

  • Take care not to tear or damage the seat covers.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Stand the third row seat upright, and hold it.

  1. Remove the foot cover.

  1. While holding the seat upright, remove the bolts securing the latch (A), and disconnect the cable (B) by releasing the push nut (C), then remove the latch.

    NOTE: Replace the push nut you removed with a new one.

  2. CReplace.BBAFastener Locations? : Bolt, 28 x 1.25 mm 21 N·m (2.1 kgf·m, 15 lbf·ft)
  1. Install the latch (A) in the reverse order of removal, and move it left or right until it is centered on the striker.

  2. A8 x 1.25 mm 21 N·m (2.1 kgf·m, 15 lbf·ft)
    Third Row Seat Latch Cable Replacement

    Third Row Seat Removal/Installation

    See More:

    Honda Odyssey Service Manual > Doors: Horizontal Adjustment at the Front
    Adjust the upper roller (A) and the lower roller subbase (B). Slightly loosen the upper roller bolts (C). Slightly loosen the lower roller subbase bolts (D) with TORX T40 bit. Move the door in or out until it is flush with the body. Tighten all bolts securely. ABD8 x 1.25 mm30 N·m(3.1 kgf·m, 22 l ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2024 Copyright www.hodyssey.net
    0.0098