Honda Odyssey Service Manual: Brake Master Cylinder Inspection

Honda Odyssey Service Manual / Chassis / Brakes / Hydraulic Brakes / Brake Master Cylinder Inspection

  1. Remove the master cylinder.

  1. Inspect and note these items:

    • Before reassembling, check that all parts are free of dirt and other foreign particles.

    • Do not try to disassemble the master cylinder assembly. Replace the master cylinder assembly with a new part if necessary.

    • Do not allow dirt or foreign matter to contaminate the brake fluid.

    2. MASTER CYLINDER Check for leaks, rust, and damage.O-RING Replace.RESERVOIR Check for damage.STRAINER Remove accumulated sediment.RESERVOIR SEAL Check for damage and deterioration.RESERVOIR CAP Check the vent holes for blockage.

  1. Install the master cylinder.

    Brake Hose and Line Inspection

    Brake Pedal Position Switch Test/Replacement

    See More:

    Honda Odyssey Service Manual > Blind Spot Monitor: BSI Radar Unit Removal/Installation
    Remove the rear bumper. Remove rear bumper side spacer B. BNOTE: This illustration shows left of the vehicle, right is similar. Remove the BSI radar unit (A). Disconnect the 6P connector (B). Remove the bolts. BA6 x 1.0 mm 9.4 N·m (0.96 kgf·m, 6.9 lbf·ft)NOTE: This illustration shows left of the ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0106