Honda Odyssey Service Manual: Rear A/C Control Unit   Inputs and Outputs

Honda Odyssey Service Manual / HVAC / Cooling / Rear A/C System Description / Rear A/C Control Unit   Inputs and Outputs

5 4 3 2 1 REAR A/C CONTROL UNIT CONNECTOR B (5P)Wire side of female terminals

CONNECTOR B

Cavity

Wire color

Terminal name

Description

Signal

1

LT GRN

IG2

IG2 power supply

With ignition switch ON (II): battery voltage

2

BLU

BLW-V-Rr

Feedback signal of power rear transistor drain voltage

With ignition switch ON (II): about 0 V-battery   voltage (depending on rear blower motor speed)

3

BLK

GND

Ground for rear A/C control unit (G652)

Less than 0.2 V at all times

4

WHT

BLW-G-Rr

Outputs rear power transistor gate voltage

With ignition switch ON (II) and fan control button OFF: less than 0.2 V
   With ignition switch ON (II) and fan control button ON: about 4.0 V-battery   voltage (depending on rear blower motor control)

5

ORN

BUS-DATA

Front-Rear communication

???


    Rear A/C Control Unit   Inputs and Outputs

    Rear A/C Control Panel   Inputs and Outputs (With Climate Control)

    See More:

    Honda Odyssey Service Manual > Window Control: Rear Power Window Switch Test/Replacement
    Remove the sliding door panel. Disconnect the 14P connector (A) from the rear power window switch (B). BA Remove the two screws and the rear power window switch. Swap the rear power window switch with another known-good power window switch and test. If the original power window switch is faulty; rep ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0057