Honda Odyssey Service Manual: Rear A/C Control Panel Inputs and Outputs (With Climate Control)

Honda Odyssey Service Manual / HVAC / Cooling / Rear A/C System Description / Rear A/C Control Panel Inputs and Outputs (With Climate Control)

Cavity	Wire color	Terminal name	Description	Signal
1	GRY	ILL+	Power source for illumination	With lighting switch ON: battery voltage
2	LT GRN	IG2	IG2 power supply	With ignition switch ON (II): battery voltage
3	ORN	BUS-DATA	Front-Rear communication	???
4	BLK	GND	Ground for rear A/C control panel (G701)	Less than 0.2 V at all times
5	RED	ILL- (LED)	Detects illumination control signal	With combination light switch ON: changed voltage (depending on dashlights brightness controller)

Rear A/C Control Unit Inputs and Outputs

A/C Compressor Replacement

See More:

Honda Odyssey Service Manual > Alternator Overhaul: Alternator Brush Inspection
Measure the length of both brushes (A) with a vernier caliper (B): If either brush is shorter than the service limit, replace the brush holder assembly. If the brush length is OK, go to step 14. Alternator Brush Length Standard (New): 10.5 mm (0.413 in) Service Limit: 1.5 mm (0.059 in) BA ...

Honda Odyssey Owners Manual

Honda Odyssey Service Manual

0.0099