Honda Odyssey Owners Manual: Back-Up/Taillight Bulbs

When replacing, use the following bulbs.

Back-Up Light: 21 W
Taillight: 3CP

1. Remove the cover by prying on the edge of the cover using a flat-tip screwdriver.
► Wrap the flat-tip screwdriver with a cloth to prevent scratches.

2. Remove the coupler.
►  It can be removed by pushing the tab.
3. Remove the base gasket.
4. Turn the socket to the left and remove it.
5. Remove the old bulb and insert a new bulb.

    Brake/Rear Side Marker/Taillight and Rear Turn Signal Light Bulbs

    Rear License Plate Light Bulbs

    See More:

    Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Second) Replacement
    Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the sliding door sill trim. Disconnect the side impact sensor (second) 2P connector (A) on the left or right wire harness. ABC Remove the TORX bolt (B) using a TORX T30 bit, then remove ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0068