Honda Odyssey Owners Manual: Changing the Wiper Blade Rubber

1. Lift the driver side wiper arm first, then the passenger side.

2. Press and hold the tab, then slide the blade from the wiper arm.

NOTICE

Avoid dropping the wiper arm; it may damage the windshield.

3. Slide the wiper blade out from its holder by pulling the tabbed end out.

4. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.

5. Slide the new wiper blade onto the holder from the bottom end.
►  The tab on the holder should fit in the indent of the wiper blade.
6. Slide the wiper blade onto the wiper arm until it clicks.
7. Lower the passenger side wiper arm first, then the driver side.

    Checking and Maintaining Wiper Blades

    Changing the Rear Wiper Blade Rubber

    See More:

    Honda Odyssey Service Manual > Dashboard Assembly: Dashboard/Steering Hanger Beam Removal/Installation
    Special Tools Required KTC Trim Tool Set SOJATP2014 *Available through the Honda Tool and Equipment Program; call 888-424-6857 SRS components are located in this area. Review the SRS component locations   and the precautions and procedures   before doing repairs or service. NOTE: ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0056