Honda Odyssey Owners Manual: Changing the Rear Wiper Blade Rubber

1. Raise the wiper arm off.
2. Pivot the bottom end of the wiper blade up until it comes off from the wiper arm.

3. Slide the blade out of the wiper.

4. Remove the retainers from wiper blade and mount it to a new rubber blade.

NOTICE

Avoid dropping the wiper arm, it may damage the rear window.

5. Slide the new wiper blade onto the holder.
►  Make sure it is engaged correctly, then install the wiper blade assembly onto the wiper arm.

    Changing the Wiper Blade Rubber

    Checking and Maintaining Tires

    See More:

    Honda Odyssey Service Manual > Over-Run Alternator Decoupler (OAD) Pulley Removal and Installation: Installation
    Loosely tighten the OAD pulley (A), then insert the alternator OAD pulley holder (B) into the OAD pulley. B07AAB-TK8A100A Place a 10 mm deep socket wrench (A) through center of the alternator OAD pulley holder (B), onto the hex on the end of the alternator shaft. ABC Hold the alternator OAD pulley ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0055