Honda Odyssey Service Manual: Rotor Slip Ring Test

  1. Check for continuity between the slip rings (A):

    • If there is continuity, go to step 15.

    • If there is no continuity, replace the rotor assembly.

  2. ABC
  3. Check for continuity between each slip ring and the rotor (B) and the rotor shaft (C):

    • If there is no continuity, go to step 16.

    • If there is continuity, replace the rotor assembly.


    Alternator Brush Inspection

    Alternator Reassembly

    See More:

    Honda Odyssey Service Manual > Trunklid/Tailgate/Cargo Doors: Power Tailgate Drive Unit Replacement
    Remove the C-pillar trim. Remove the upper trim and the left tailgate side trim. Note the alignment marks on the drive unit and the arm unit, then carefully remove the two bolts (A), nut (B), and the arm unit (C). CB12 x 1.25 mm109.0 N·m (11.11 kgf·m, 80.41 lbf·ft)A2.2 N·m (2.2 kgf·m, 16.0 lbf ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0078