Honda Odyssey Service Manual: Ignition Switch Replacement

NOTE: SRS components are located in this area. Review the SRS component locations, and precautions and procedures   before doing repairs or servicing.

  1. Do the battery terminal disconnection procedure.

  1. Remove the steering column covers.

  1. Disconnect the 5P connector (A) from the ignition switch (B).

  2. AB
  3. Remove the two screws and the ignition switch.

  4. Install the parts in the reverse order of removal.

  5. Do the battery terminal reconnection procedure.

    Ignition/Push Start and Steering Lock

    Steering Lock Replacement

    See More:

    Honda Odyssey Service Manual > Rear Knuckle/Hub Bearing Unit Replacement: Exploded View
    12 x 1.25 mm98 N·m(10.0 kgf·m, 72 lbf·ft)14 x 1.5 mm78 N·m(8.0 kgf·m, 58 lbf·ft)KNUCKLECheck for deformation and damage.WASHERCheck for deformation and damage.HUB BEARING UNIT(MAGNETIC ENCODER)Check for faultymovement and wear.REAR BRAKE DISC/DRUMCheck for wear and rust.FLATHEAD SCREW6 x 1.0 ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0079