Honda Odyssey Service Manual: Steering Lock Replacement

  1. Remove the steering column.

  1. Center-punch both of the shear bolts (A), and drill their heads off with a 5.0 mm (0.197 in) drill bit. Be careful not to damage the steering lock (B) when removing the shear bolts.

  2. AB
  3. Remove the shear bolts from the steering lock, then remove the steering lock.

  4. Remove the immobilizer-keyless control unit from the steering lock, then install it to the new steering lock.

  5. Install the steering lock without the key inserted.

  6. Loosely tighten the new shear bolts.

  7. Insert the ignition key, and check for proper operation of the steering wheel lock and that the ignition key turns freely.

  1. Tighten the shear bolts (A) until the hex heads (B) twist off.

  2. AB
  3. Install the steering column.

  4. Rewrite all new keys to the new immobilizer control unit-receiver, and make sure the immobilizer system works properly.

    Ignition Switch Replacement

    Steering Lock Replacement (With Keyless Access)

    See More:

    Honda Odyssey Owners Manual > General Information on the Audio System: Recommended CDs
    • Use only high-quality CD-R or CD-RW discs labeled for audio use. • Use only CD-R or CD-RW discs on which the recordings are closed. • Play only standard round-shaped CDs. A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either. &# ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2022 Copyright www.hodyssey.net
    0.0072