Honda Odyssey Service Manual: Fuel Fill Door Adjustment

  1. Loosen the hinge mounting bolts (A) slightly.

  2. A6 x 1.0 mm18 N·m (1.8 kgf·m, 13 lbf·ft)B
  3. Adjust the fuel fill door (B) in or out until it's flush with the body, and up or down as necessary to equalize the gaps.

  4. Tighten the hinge mounting bolts.

  5. Check that the fuel fill door opens properly and locks securely.


  1. Apply multipurpose grease to the location indicated by the arrow.

  2. ?
  3. Apply touch-up paint to the hinge mounting bolts and around the hinges, and let the paint dry.

    Fuel/Charge Lid

    Fuel Fill Door Opener Cable Replacement

    See More:

    Honda Odyssey Service Manual > Blower Motor: Rear Blower Motor Replacement
    Remove the right rear side trim panel. Detach the clip (A), then remove the side duct (B). BA Disconnect the 2P connector (A) from the rear blower motor (B). Remove the self-tapping screws and the rear blower motor from the rear HVAC unit. BA Install the motor in the reverse order of removal. ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0093