NOTE:
Put on gloves to protect your hands.
Take care not to tear or damage the seat covers.
Check the second row seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
The left second row seat is shown; the right second row seat is similar.
Remove the rear side trim panel.
Remove the anchor bolt (A).
A 7/16-20 UNF 39 N·m (4.0 kgf·m, 29 lbf·ft)
Remove the upper anchor cover (A), then remove the upper anchor bolt (B).
B 7/16-20 UNF 39 N·m (4.0 kgf·m, 29 lbf·ft) Apply thread lock. A
Remove the C-pillar trim.
Remove the second row seat belt assembly (A).
Remove the upper retractor mounting bolt (B) and the lower retractor bolt (C).
If necessary, remove the second row seat belt protector (D).
A B 6 x 1.0 mm 9.4 N·m (0.96 kgf·m, 6.9 lbf·ft) C 7/16-20 UNF 39 N·m (4.0 kgf·m, 29 lbf·ft) D
Remove the shoulder anchor adjuster (A).
A 8 x 1.25 mm 24 N·m (2.4 kgf·m, 18 lbf·ft)
Install the seat belt assembly in the reverse order of removal, and note these items:
Check that the retractor locking mechanism functions.
Assemble the washer, the collar, and the bushing on the upper anchor bolt as shown.
Apply medium strength liquid thread lock to the upper anchor bolt before reinstallation.
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
Upper anchor bolt installation
UPPER ANCHOR BOLT Apply thread lock. COLLAR BUSHING TOOTHED LOCK WASHER UPPER ANCHOR
