Honda Odyssey Service Manual: Rear

Second Row Center Seat Cushion Cover Replacement

Special Tools Required

  • KTC Trim Tool Set SOJATP2014
  • *Available through the Honda Tool and Equipment Program; call 888-424-6857


  • Put on gloves to protect your hands.

  • Take care not to tear or damage the seat covers.

  • Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

  1. Separate the seat-back.

  1. Release the hook strip (A) from under the seat cushion.

  2. A
  1. Release the hook strips (A) from under the seat cushion.

  2. AA

  1. Release the hook strips (A) from both sides of the seat cushion.

  2. AAA
  1. Remove the seat cushion cover/pad (A) from the seat frame (B).

  2. AB

  1. Release the Velcro fastener (A) from under the seat cushion.

  2. A
  1. Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B), then remove the cover.

  2. AB Replace.

  1. Install the cushion cover in the reverse order of removal, and note these items:

    • To prevent wrinkles when installing the seat cushion cover, make sure the material is stretched evenly over the pad before securing the upholstery rings.

    • Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).

  2. AReplace.DBC

Second Row Center Seat-Back Armrest Beverage Holder Replacement

See More:

Honda Odyssey Service Manual > Keyless Security System: Immobilizer Function, Keyless Buzzer Replacement
Immobilizer Function The vehicle is disables the vehicle unless a programmed remote is used. This system consists of a transponder built into the remote, the engine start/stop switch (has a built-in receiver), the MICU (has a built-in imoes unit), an immobilizer indicator, and the PCM. When the remo ...

Honda Odyssey Owners Manual

Honda Odyssey Service Manual

© 2018-2024 Copyright