Honda Odyssey Service Manual: Inspection

  1. Reassemble the damper mounting base, the damper mounting washer (for some models), and the self-locking nut.

  1. Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.

  2. Check for oil leaks, abnormal noises, and binding during these tests.


    Disassembly

    Reassembly

    See More:

    Honda Odyssey Service Manual > Crash Sensors: Side Impact Sensor (Third) Replacement
    Removal Do the battery terminal disconnection procedure, then wait at least 3 minutes before starting work. Remove the rear side trim panel. Disconnect the side impact sensor (third) 4P connector (A) on the left or right side wire harness. Left side ABC Right side ABDC Remove the TORX bolt (B) using ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2025 Copyright www.hodyssey.net
    0.0104