Honda Odyssey Owners Manual: Automatic Lighting Control*

Automatic lighting control can be used when the ignition switch is in ON .

When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.
►You can change the auto light sensitivity setting.

We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.

The light sensor is in the location shown below.

Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.

Adjust the auto light sensitivity as follows:

    Manual Operation

    Automatic Lighting Off Feature

    See More:

    Honda Odyssey Service Manual > Brake Control and Vehicle Dynamics: Wheel Speed Sensor Replacement
    Front Turn the ignition switch to LOCK (0). Remove the grommet (A), then disconnect the wheel speed sensor connector (B). ABCD6 x 1.0 mm9.3 N·m (0.95 kgf·m, 6.9 lbf·ft) Remove the clamp (C), the clip, and the wire guide rubber. Remove the bolt and the wheel speed sensor (D). Install the wheel spe ...

    Honda Odyssey Owners Manual

    Honda Odyssey Service Manual

    © 2018-2026 Copyright www.hodyssey.net
    0.0051