Honda Odyssey Service Manual: VSA Modulator-Control Unit Removal and Installation

Honda Odyssey Service Manual / Chassis / Brake Control and Vehicle Dynamics / VSA Modulator-Control Unit Removal and Installation

notice

Do not spill brake fluid on the vehicle; it may damage the paint. If brake fluid gets on the paint, wash it off immediately with water.

NOTE:

  • Be careful not to damage or deform the brake lines during removal and installation.

  • To prevent the brake fluid from dripping, plug and cover the hose ends and joints with a shop towel.

BSI OFF Switch Test/Removal/Installation

Removal

See More:

Honda Odyssey Owners Manual > Replacing Light Bulbs: Brake/Rear Side Marker/Taillight and Rear Turn Signal Light Bulbs
When replacing, use the following bulbs. Brake/Rear Side Marker/Taillight: 21/5 W Rear Turn Signal Light: 21 W (Amber) 1. Remove the mounting bolts. 2. Place one hand on the outer corner of the taillight assembly and other hand on the lower edge of the taillight, near the cargo area. 3. Pull the out ...

Honda Odyssey Owners Manual

Honda Odyssey Service Manual

© 2018-2026 Copyright www.hodyssey.net
0.031